Micronics PCI/ISA System Board D6-IN Informações Técnicas descarregar pdf (Página 13)

Twister LX System Board Manual

Configuring the Twister

Although the Twister LX system board is packaged in

materials that are designed to protect it from physical

damage and static electricity, it is important to use care

while unpacking the board and setting it up.

Static Electricity

The Twister LX is shipped from the factory in an anti-

static bag. To reduce the possibility of damage from

static discharge, it is important to neutralize any static

charges your body may have accumulated before han-

dling the board.

The best way to do this is to ground yourself using a

special anti-static wrist or ankle strap. If you do not have

an anti-static strap available, touch both of your hands

to a safely grounded object, such as the power supply or

chassis of a computer that is connected to the power

socket. After you have grounded yourself, ground the

Twister LX board via one of the solder pads that sur-

round its mounting holes. When you remove the Twister

LX from its packaging, place it on top of the anti-static

bag, and carefully inspect the board for damage which

might have occurred during shipment.

Environment Considerations

Make sure the finished computer system is in an area

with good ventilation. The system should not be in direct

sunlight, near heaters, or exposed to moisture, dust, or

dirt.

Chapter 2: Configuring the Twister LX

Chapter

1 2 ... 8 9 10 11 12 13 14 15 16 17 18 ... 85 86

Sem comentários

Micronics PCI/ISA System Board D6-IN Informações Técnicas Página 13